基于改进雷达图的配电系统电能质量评估方法

本文针对配电系统电能质量综合评估存在的评估指标权重分配过于主观或客观的问题,提出一种基于改进雷达图法的配电系统电能质量评估方法。该方法利用最小偏差组合权重法计算各评估指标的最优组合权重。并在传统雷达图的基础上对各指标轴间夹角值的确定和特征向量的选取两方面做了进一步的改进。首先采用扇形区域取代原始的三角形区域,并利用最小偏差组合权重法计算各指标轴间夹角值。其次选择新的特征向量构造评估函数对配电系统电能质量进行综合评估。最后通过对某钢铁厂棒材变电站10kV配电系统电能质量进行综合评估,验证了该方法的可行性和合理性。较传统雷达图而言,改进雷达图法解决了传统雷达图法中各指标间信息共用以及评估结果不唯一的问题,使评估结果更加准确合理。     

An engineering method for complex structural optimization involving both size and topology design variables

This work presents an engineering method for optimizing structures made of bars, beams, plates, or a combination of those components. Corresponding problems involve both continuous (size) and discrete (topology) variables. Using a branched multipoint approximate function, which involves such mixed variables, a series of sequential approximate problems are constructed to make the primal problem explicit. To solve the approximate problems, genetic algorithm (GA) is utilized to optimize discrete variables, and when calculating individual fitness values in GA, a second-level approximate problem only involving retained continuous variables is built to optimize continuous variables. The solution to the second-level approximate problem can be easily obtained with dual methods. Structural analyses are only needed before improving the branched approximate functions in the iteration cycles. The method aims at optimal design of discrete structures consisting of bars, beams, plates, or other components. Numerical examples are given to illustrate its effectiveness, including frame topology optimization, layout optimization of stiffeners modeled with beams or shells, concurrent layout optimization of beam and shell components, and an application in a microsatellite structure. Optimization results show that the number of structural analyses is dramatically decreased when compared with pure GA while even comparable to pure sizing optimization.     

Adaptive GLR-, Rao- and Wald-based CFAR detectors for a subspace signal embedded in structured Gaussian interference

The problem of detecting a subspace signal embedded in subspace Gaussian interference and thermal noise is studied in this paper. In this problem, both the signal-independent and signal-dependent interferences are assumed to be present, therefore the overall interference subspace covers the signal subspace. The approach of this paper extends previous works involving either of those two kinds of interferences. A set of secondary data containing only interference plus noise is employed to estimate the interference covariance matrix and the noise power. Three new detectors are designed via the generalized likelihood ratio (GLR), Rao and Wald tests, respectively. Their probabilities of false alarms (PFAs) and detections are analytically derived. The PFAs show that the new detectors have the constant false alarm rate (CFAR) property against the interference and noise. Numerical results show that the new detectors outperform their counterparts for the studied problem. Furthermore, the new detectors are less sensitive to the secondary data size and to the mismatched subspace signal than some other detectors, such as the GLR detector (GLRD), the adaptive matched filter (AMF), the adaptive subspace detector (ASD), etc.     

具有光照鲁棒的图像匹配方法

针对现有的基于局部特征的图像匹配算法对光照变化敏感、匹配正确率低等问题，提出一种具有光照鲁棒性的图像匹配算法。首先使用实时对比保留去色（RTCP）算法灰度化图像，然后利用对比拉伸函数模拟不同光照变换对图像的影响从而提取抗光照变换特征点，最后采用局部强度顺序模式建立特征点描述符，根据待匹配图像局部特征点描述符的欧氏距离判断是否为成对匹配点。在公开数据集上，所提算法与尺度不变特征变换（SIFT）算法、加速鲁棒特征（SURF）算法、"风"（KAZE）算法和ORB算法在匹配速度和匹配正确率上进行了对比实验。实验结果表明：随着图像亮度差异的增加，SIFT算法、SURF算法、"风"（KAZE）算法和ORB算法匹配正确率下降迅速，所提算法下降缓慢并且正确率均高于80%；所提算法特征点检测较慢和描述符维数较高，平均耗时为23.47 s，匹配速度不及另外四种算法，但匹配质量却远超过它们。对实时性要求不高的系统中，所提算法可以克服光照变化对图像匹配造成的影响。     

Distributed learning consensus control based on neural networks for heterogeneous nonlinear multiagent systems

This paper considers a novel distributed iterative learning consensus control algorithm based on neural networks for the control of heterogeneous nonlinear multiagent systems. The system's unknown nonlinear function is approximated by suitable neural networks; the approximation error is countered by a robust term in the control. Two types of control algorithms, both of which utilize distributed learning laws, are provided to achieve consensus. In the provided control algorithms, the desired reference is considered to be an unknown factor and then estimated using the associated learning laws. The consensus convergence is proven by the composite energy function method. A numerical simulation is ultimately presented to demonstrate the efficacy of the proposed control schemes.     

基于声发射和高斯混合模型的灰岩破裂特征识别研究

通过单轴压缩条件下灰岩破裂过程的声发射试验研究,利用高斯混合模型(GMM)对加载过程声发射信号波形特征进行深入分析,探索性识别灰岩破裂失稳过程的裂纹模式及其前兆特征。分析结果表明,灰岩在单轴加载过程中先后主要存在张拉和剪切两种破裂模式。其中,张拉破裂的声发射信号波形特征在AF-RA坐标空间呈现低A_F值、高R_A值分布;剪切破裂的声发射信号波形特征在AF-RA坐标空间呈现低R_A值、高A_F值,且随着应力的增加分布中心向A_F轴靠拢。GMM分析结果揭示了灰岩在整个应力加载过程中以张拉裂纹为主,在加载前中期几乎全为张拉裂纹,临近破坏阶段过渡到剪切破坏为主。剪切裂纹所占比例的最大值出现在(0.8～0.9)σ_c阶段,也是AF-RA坐标轴分布呈现最大A_F值时。研究结果可为预测早期灰岩破裂失稳提供参考,同时为深入研究识别岩石破裂失稳前兆信号特征提供了一种分析方法。     

顺苯磺酸阿曲库铵不抑制患者接受术中血液回收后肌肉及呼吸功能的恢复:单中心前瞻性研究

目的术中血液回收技术(intraoperative blood salvage,IBS)是临床常用的一种血液保护技术,但术后自体血液回输存在肌松药物残留问题。顺苯磺酸阿曲库铵(cis-atracurium besilate,Cisa)是一种新型肌松药物,本研究观察Cisa应用于接受IBS患者的临床安全性。方法前瞻性分析比较2017年3月至6月在北京积水潭医院脊柱科接受全身麻醉下腰椎减压内固定手术的50例腰椎间盘突出患者。患者顺序纳入,前25例进入试验组,后25例进入对照组。全身麻醉后应用Cisa作为肌松药,采用IBS技术于术中采集手术视野自体血并洗涤。术后入恢复室,常规监测4个成串刺激(train-of-four stimulation,TOF)以评估肌肉恢复情况,拔除气管插管后每隔5 min记录TOF值,共观察40 min。试验组患者于拔除气管插管后一次性输入术中收集的自体血,对照组于40 min观察结束后回输自体血。分析并比较两组患者术前及观察结束时的动脉血氧分压(arterial partial pressure of oxygen,PaO_2)和二氧化碳分压(partial pressure of carbon dioxide in artery,PaCO_2),用于评估呼吸功能恢复情况。结果所有患者完成全部观察内容,其中男女比例1∶1,年龄(55. 1±11. 1)岁,体重(72. 7±9. 8) kg,两组基线资料均衡,TOF值随时间推迟呈上升趋势,但两组患者在40 min观察点上TOF增加值无统计学差异[(9. 6±7. 3)%比(9. 5±8. 1)%,P=0. 963]。两组患者在观察结束时均出现一定程度的呼吸功能不全,但组间PaCO_(2-incr)[4. 4(2. 0,8. 0) mm Hg比4. 8 (0,7. 1) mm Hg,P=0. 312)(1 mm Hg=0. 133 kPa)和PaO_(2-decr)[3. 2 (-2. 4,7. 9) mm Hg比7. 2(-1. 6,13. 0) mm Hg,P=0. 133]并无统计学差异。结论全身麻醉下接受IBS的患者使用Cisa作为肌松药物是安全的。     

靶面激光光斑尺寸原位测量的研究

提供了一种简便易行的靶面激光光斑尺寸原位测量的方法。从高斯光束的横向光强分布特性出发,建立了激光烧蚀斑半径与辐照激光能量、光斑尺寸、烧蚀阈值间的关系式,模拟分析发现辐照激光光斑尺寸对烧蚀斑半径随辐照能量变化曲线有较大影响。对于脉宽为2 ms,波长为1064 nm的激光,实验测量了不同能量激光辐照下相纸烧蚀斑半径,并用推导出的关系式拟合测量数据,获得了靶面处光斑尺寸和样品烧蚀阈值。同时,也测量了不同位置处的光斑尺寸和样品烧蚀阈值,对高斯光束束腰位置和样品烧蚀阈值的光斑尺寸效应进行了验证。研究结果表明该技术结果可靠,简单高效。该技术可以为高能激光与固体物质相互作用的基础研究和激光加工等应用领域中实现简单方便地测量靶面光斑尺寸提供帮助。     

Stress distribution in thick-walled cylinder due to non-uniform radial pressure on the example of reinforcement corrosion in concrete

This paper presents an analytical solution to the non-uniform pressure on thick-walled cylinder. The formulation is based on the linear elasticity theory (plain strain) and stress function method. As an example, the proposed solution is used to model the stress distribution due to non-uniform steel reinforcement corrosion in concrete. The model is formulated considering different scenarios of corrosion pressure distribution. It is validated against the finite element model for different cases of non-uniform pressure distributions. The results show that the corrosion-induced cracks are likely to start just beyond the anodic zone. This is confirmed by the experimental tests on concrete cylinder exposed to non-uniform accelerated corrosion of steel reinforcement. The model can be effectively used to calculate the distribution of corrosion-induced stresses in concrete.